Dataforts

Dataforts in Net is the data layer that grows on top of the event bus, and v0.15 is where it lands. Every prior approach to "where does the data live" presupposes an answer — S3 holds it in a region, Ceph holds it across racks, IPFS holds it wherever a pin exists. Storage is a place. You go to the place to read. You ship to the place to write. Dataforts inverts that: blobs are content-addressed BLAKE3 chunks, the address of the data is the data, and the chunks live on whichever nodes have capacity and capability to hold them. There is no canonical home.

Data in Dataforts is a fluid. Hot chunks — bytes that some node keeps fetching — get pulled toward the nodes that read them, because re-fetching the same hash leaves a copy behind. Cold chunks stay where they are or drain into nodes with spare disk. The same pressure that fills a near-empty node also empties a near-full one. Nothing tells the cluster to rebalance. The blobs move because the reads moved.

Heat is per-chunk and decays. A chunk read a hundred times in the last minute has gravity; a chunk read once a year ago has none. The capability index advertises heat the same way it advertises disk-free, scope, and class. A peer with gravity for a given hash is the natural target when the chunk's current holder needs to shed, and the natural source when a new reader asks. Migration is the heat reading itself — no scheduler, no shuffle plan, no coordinator deciding where bytes should be. The reads decide.

When a node crosses its high-water disk threshold, it picks the coldest chunks it holds and pushes them to peers with capacity. The receive side is opt-in via a capability tag — operators decide which nodes accept overflow and which stay pull-only. Pushes ride the existing per-chunk replication runtime; the only new wire shape is a one-shot nudge telling the receiver to open the chunk channel. Storage saturation no longer fails closed against new writes — the cluster bleeds pressure into peers that can absorb it, until either the workload subsides or those peers fill up too.

A producer that publishes a chunk and immediately reads it back never sees a gap. The publish path returns a write token; the read path waits on that token's durability watermark before returning the bytes. Read-your-own-writes is the producer's contract with itself — independent of replication factor, independent of cluster topology, independent of which peer ends up holding the chunk. The mesh doesn't promise global linearizability. It promises that you see what you just wrote, however many hops the bytes had to take to settle.

These properties compose with the rest of the stack. RedEX writes a BlobRef into the event chain like any other event — the substrate verifies the BLAKE3 hash, the chain stays causal, the blob payload pulls separately when somebody needs it. CortEX folds events that reference blobs into views; the views pin the chunks they care about so gravity doesn't sweep them away. A drone, a workstation, and a datacenter can hold the same dataforts — different slices of the same content-addressed space, replicating according to who reads what, all encrypted in flight and on disk.

There is no object store to provision. There is no cluster to operate. The data is on the mesh because the mesh is the data.

Named after Billy Idol's 1983 album / title track — a release that asks "more, more, more" of the substrate The Warriors laid down. v0.14 made replication the load-bearing layer underneath the channel surface. v0.15 stacks the four-phase Dataforts compositional layer on top: greedy-LRU caching pulls in-scope chains, data gravity drifts hot ones toward their readers, BlobRef carries content-addressed pointers without owning the bytes, and read-your-writes gives producers a session-bounded "did my write land yet?" handle. No new wire protocol — every phase composes against the existing capability index, proximity graph, and causal: tag layer that landed in The Warriors.

v0.15 lands the full Rebel Yell roadmap from DATAFORTS_PLAN.md — Phases 1, 3, 4, and 5 of the seven-phase plan ship in this release, completing Dataforts as a compositional data plane on top of the v0.14 substrate. The full surface ships across Rust core, Python, Node, Go, and C FFI, with end-to-end mesh integration; greedy and gravity are runtime-toggleable policies (operators flip them on / off live against a running mesh, no rebuild required); the single dataforts Cargo feature gates whether the surface compiles at all. A mesh-native blob storage extension (Phase 3.5) lands in the same release — MeshBlobAdapter implements the v0.15 BlobAdapter trait against the local mesh's RedEX replication layer, so a Dataforts-enabled cluster has a working content-addressed blob store the moment Redex::enable_replication(mesh) is called. See DATAFORTS_BLOB_STORAGE_PLAN.md for the design. The v0.3 active-overflow extension ships alongside — disabled by default, one boolean to turn on; when active, a node pushes its coldest blobs to overflow-enabled peers with free disk via a new nRPC. Design + per-PR shipping status in DATAFORTS_BLOB_OVERFLOW_PLAN.md.

The hardening posture from the Black Diamond line continues. Two coordinated code-review passes landed before the v0.15 branch cut: the primary dataforts-feature review (docs/misc/CODE_REVIEW_2026_05_11_DATAFORTS.md) closed 54 numbered items D-1..D-54, an independent second pass surfaced 11 N-series items, all but three (deferred with rationale) closed. Five post-merge follow-up commits on the channel-hash-32 branch hardened the RPC-inbound dispatcher hot path and tightened collision-lookup contracts.

Alongside Dataforts, v0.15 carries one cross-cutting breaking change: the canonical channel hash widens from u16 to u32 substrate-wide. The wire NetHeader::channel_hash stays u16 (the 64-byte cache-line-aligned header is full), mirroring the origin_hash u64-canonical / u32-wire precedent. ACL, storage, config, and RYW decisions key on the canonical 32-bit hash; the wire u16 is a fast-path filter hint only. The PermissionToken wire form grows from 159 → 161 bytes.

Greedy-LRU dataforts (Phase 1)

Per-node speculative caching of in-scope chains observed via the tail-subscription path. The mesh fans every event through a GreedyObserver hook; the runtime decides whether to admit each event into a per-channel cache file. Cold channels evict under cluster-cap pressure and withdraw their causal:<hex> advertisement so peers re-route to a healthy holder. Wires via Redex::enable_greedy_dataforts(mesh, config, local_caps, intent_registry).

`GreedyConfig`

pub struct GreedyConfig {
    pub scopes: Vec<ScopeLabel>,           // scope-axis admission
    pub proximity_max_rtt: Option<Duration>, // proximity-axis admission
    pub per_channel_cap_bytes: u64,        // storage-axis admission, per chain
    pub total_cap_bytes: u64,              // cluster-cap eviction trigger
    pub bandwidth_budget_fraction: f32,    // share of measured NIC peak
    pub nic_peak_bytes_per_s: Option<u64>, // operator override of probe
    pub intent_match: IntentMatchPolicy,   // capability-preference axis
    pub colocation_policy: ColocationPolicy, // colocation axis
    pub observer_inflight_cap: usize,      // tokio spawn fan-out bound
}

The five admission axes (scope + proximity + capability-preference + colocation + storage-cap) gate every inbound event before the bandwidth-budget gate; rejected events bump the per-reason counter rather than entering the cache file. A bandwidth-budget rejection now increments a distinct dataforts_greedy_admit_throttled_bandwidth_total counter (was conflated with capacity-rejects pre-fix) so operators can disambiguate "NIC saturated" from "cache full." nic_peak_bytes_per_s overrides the hardcoded 1 Gbps default for fleets with faster NICs.

Admission + eviction

Inbound events flow through GreedyRuntime::dispatch_event(channel_name, channel_hash, origin_hash, chain_caps, payload). Admission is a pure function — should_admit(inputs) -> AdmissionVerdict — that returns one of Admit / RejectedByAdmission(AdmitRejectReason). The bandwidth-budget gate runs only after admission passes; admitted events that fail the budget gate are throttled, not silently dropped (D-2). Eviction under the cluster cap returns an EvictionSweep { evicted: Vec<EvictedEntry> } value; the runtime calls sink.withdraw_chain(origin_hash) for each evicted entry inline so peers see the capability tag drop in the same tick (D-1).

The cache-side RedexFile keys on a synthesized ChannelName (dataforts/greedy/<hex16>) derived from the wire u16 channel hash; the canonical 32-bit hash decision happens at the ACL / config / RYW layer, not at the data-plane cache (the wire hash is what inbound packets carry). Two channels colliding on the wire u16 share a cache file — a small mix-up at the data-plane layer; ACL and storage decisions stay collision-safe via the canonical hash.

TOCTOU + lock-coalescing fixes

is_new_channel = !cache.contains(channel) followed by cache.upsert(...) previously took two independent lock acquisitions; concurrent dispatch_event calls on the same channel both observed is_new_channel = true, both ran sink.announce_chain, and the second upsert orphaned the first RedexFile. v0.15 folds the lazy-open into a single cache.get_or_insert_with scope holding the lock for contains / open / upsert; announce fires after lock release. The steady-state path takes one lock; the new-channel path takes two with TOCTOU re-check (D-6, D-28).

upsert on an already-registered channel previously refreshed the file pointer without subtracting the prior entry's bytes from total_bytes. Reopens via dispatch_event's is_new_channel path accumulated total_bytes that no eviction could ever drain, eventually starving the cluster-cap budget. The update branch now subtracts the prior bytes before replacing the entry's file (D-3).

entry.bytes saturates on overflow but didn't reflect retention trim from RedexFile. v0.15 ships RedexFile::retained_bytes + GreedyRuntime::resync_cache_bytes for periodic operator-driven re-anchoring; wiring is opt-in via the operator's tick loop (D-26).

`colocation_target_held` resolved from cache

ColocationPolicy::SoftPreference / StrictRequired evaluates whether the local cache already holds chains colocated with the inbound event. The pre-fix colocation_target_held = None hardcode caused StrictRequired to reject events whose colocation target was actually present locally. The runtime now resolves the colocation target by name against the cache map (D-8).

Spawn fan-out bound

observe_event is the mesh hot-path entry; without a bound, a flooding peer could create one outstanding tokio task per event before the per-event admission lock serialized them, piling up per-task Bytes + Arc<CapabilitySet> clones. v0.15 ships observer_inflight: Arc<tokio::sync::Semaphore> sized via GreedyConfig::observer_inflight_cap (default 4096); on saturation, events drop and bump dataforts_greedy_observer_dropped_overloaded rather than blocking the mesh dispatch task (D-7).

Cross-binding API surface

Every binding exposes the same enable_greedy_dataforts / disable_greedy_dataforts pair plus greedy_cached_channel_count() and greedy_prometheus_text() for operator scrape. The Go binding carries the runtime-stub fallback (NET_ERR_FEATURE_NOT_BUILT) so a cdylib built without the dataforts feature still links cleanly into cgo programs (D-20).

Data gravity (Phase 4)

Per-chain read-rate counters with exponential decay. Threshold-crossing emissions stamp heat:<hex>=<rate> onto the chain's existing capability announcement; greedy admission weights cache pulls by heat × scope-match × proximity-rank. Cold chains evict first under cluster-cap pressure; hot chains migrate toward the readers that drive the heat. No separate migration engine — gravity emerges from greedy + heat counters + capability-preference automatically.

Wires via Redex::enable_gravity_for_greedy(mesh, DataGravityPolicy) against an already-running greedy runtime.

`DataGravityPolicy`

pub struct DataGravityPolicy {
    pub enabled: bool,
    pub emit_threshold_ratio: f64,         // 1.5 = re-emit when rate is 1.5× last-announced
    pub decay_half_life_secs: u64,         // 300 = 5-minute half-life
    pub tick_interval_ms: u64,             // 5000 = 5-second tick cadence
    pub normalization_reference_rate: f64, // 1000 events/s → 1.0 on the wire
}

Heat counter + emission decision

HeatCounter::observe(now, weight) bumps the counter; HeatCounter::current_rate(now) returns the decayed rate. should_emit_heat(prev, current, ratio) is the pure-logic emission decision: emit when no prior emission, or when the current rate exceeds prev × ratio or falls below prev / ratio. Edge cases:

Near-zero prev no longer trips inf. Pre-fix, a prev of 1e-300 with finite current made current / prev evaluate to +inf, which trivially satisfied any ratio check. v0.15 treats prev below f64::EPSILON (and subnormals via is_normal()) as "no prior emission" — the bootstrap arm runs cleanly (D-29, N-9).
NaN rates short-circuit to no-emit. A NaN slipping into the counter (e.g. via a corrupted to_le_bytes round-trip on the wire) used to propagate through the ratio arithmetic. The pure function now returns EmissionDecision::Skip on any non-finite input.

Wire normalization — log-scale

Pre-fix, the wire heat:<hex>=<rate> tag normalized (rate / (rate + 1)).min(1.0), which compressed asymptotically — rate=10 → 0.91, rate=100 → 0.99. With {:.2} wire encoding, every "warm" chain looked like "blazing." v0.15 uses ln_1p(rate) / ln_1p(reference) with a configurable normalization_reference_rate; the reference defaults to 1000 events/s mapping to 1.0 on the wire. Wire format is unchanged — just the value placed on it (D-30, D-46).

`HeatRegistry` cap + LRU

HeatRegistry previously grew unbounded — one entry per (channel, origin) pair the local node ever observed. A misbehaving peer flooding diverse origin hashes could exhaust memory before any greedy-eviction signal fired. v0.15 caps the registry at DEFAULT_HEAT_REGISTRY_CAP = 8 * 1024 entries with LRU eviction by last_update; the tick loop also prunes entries with rate == 0.0 && last_emitted == Some(0.0) so cold chains drain on their own (D-10, N-2).

Inbound `heat:` tag auth

Capability announcements carrying heat:<hex> tags previously had no provenance check at the receive side — any peer could emit a heat tag claiming any chain. v0.15 gates inbound heat tags on the publisher's existing causal:<hex> claim: a node advertising heat:X without simultaneously advertising causal:X has its heat tag dropped at the receive boundary (D-11). Per-peer rate-limiting of heat: emissions is acknowledged in D-11 + N-8 as deferred — operators see today's posture in CODE_REVIEW_2026_05_11_DATAFORTS.md.

`origin_hash == 0` no longer collapses heat

Default-constructed publishers carried origin_hash = 0, which collapsed all unattributed chains into a single registry bucket and stamped a meaningless heat:0000…0000 tag onto the wire. v0.15 stamps origin_hash from identity in publish_to_peer (the natural fix) and skips heat bumps when origin_hash == 0 is observed at the gravity-runtime entry as defense-in-depth (D-9).

`announce_heat_batch` — coalesced rebroadcast

gravity_tick previously walked all heat emissions and called announce_heat per chain. Each announce_heat rewrote the full CapabilitySet::tags vector and called announce_capabilities — at 100 K chains, O(n² × n_tags) per tick with each emit duplicating all chains' tags on the wire. v0.15 ships HeatSink::announce_heat_batch; the tick gathers all emissions, retains all stale heat tags + pushes all new heat tags in one pass, and emits a single announce_capabilities (D-25).

BlobRef + BlobAdapter (Phase 3)

Content-addressed reference whose bytes live in the caller's existing storage (S3, Ceph, IPFS, local FS, …). The substrate carries the reference, never owns the bytes. Adapters implement fetch / store (or the streaming variants for multi-GB payloads); the FileSystemAdapter ships in-tree as the reference adapter.

Wire format

[0xB0, 0xB1, 0xB2, 0xB3]  // 4-byte magic (was single-byte 0xB0 pre-fix)
version: u8               // currently 1
hash:    [u8; 32]         // BLAKE3
size:    u64              // bytes; bounded by BlobRef::MAX_SIZE = 16 GiB
uri:     [u8]             // length-prefixed; the adapter URI scheme prefix

Pre-fix the discriminator was a single byte 0xB0 (D-14). A plain binary payload starting with 0xB0 would misclassify as a blob ref and route through BlobAdapter::fetch instead of being delivered directly. The 4-byte magic gives a collision probability of ~1 in 4 billion against arbitrary binary payloads. Old (pre-v0.15) blob refs are rejected on decode; v0.15 nodes can't exchange blob refs with pre-v0.15 nodes (Dataforts is new in v0.15, so this only matters for pre-release pilots).

BlobRef::MAX_SIZE = 16 GiB defaults bound the size field; BlobRef::decode and publish_blob reject anything larger. The previous u64::MAX accept-anything path could OOM on vec![0u8; len as usize] on 64-bit and silently truncate on 32-bit (D-15). RedexFileConfig::blob_max_size lifts the cap when an operator needs it.

Adapter dispatch — URI-scheme keyed

BlobAdapter::accepted_schemes() -> &[&str] declares the URI schemes the adapter handles (["s3", "s3+https"], ["file"], etc.); the registry dispatches by URI scheme, not by the channel config's blob_adapter_id. Pre-fix, an attacker who could write to a channel could choose its blob_adapter_id and route a BlobRef URI through any registered adapter — authority confusion (D-13). The scheme-keyed dispatch closes the gap; the channel-config-selected path is gone.

Hash verification on store

FileSystemAdapter::store(blob_ref, &bytes) now BLAKE3-hashes the supplied bytes and rejects on mismatch with blob_ref.hash. Pre-fix the adapter wrote whatever bytes the caller passed; a content-address-violating store would silently corrupt the addressable layer (D-12). The rename-fallback path (idempotent re-store on existing content) also hash-verifies the on-disk bytes — the v0.13/v0.14-era TOCTOU on idempotent re-store via the windowed rename is closed (D-32, N-6).

fsync of the temp file before rename + fsync of the parent dir after rename land in the FileSystemAdapter store path; power loss between rename and OS flush previously left zero-length files in the addressable space (D-33).

Streaming hooks

fetch_stream(&self, blob: &BlobRef) -> Pin<Box<dyn Stream<Item = Result<Bytes>> + Send>> and store_stream(&self, blob: &BlobRef, src: Pin<Box<dyn Stream<...>>>) ship as required methods on BlobAdapter with default implementations that route through the existing fetch / store (so existing impls keep working); adapters wanting real streaming override the defaults. The FileSystemAdapter chunks at 256 KiB (D-16).

Per-channel adapter override (multi-tenant)

BlobAdapterRegistry previously lived as a single process-wide singleton. v0.15 adds RedexFileConfig::blob_adapter_registry: Option<Arc<BlobAdapterRegistry>> for per-channel override; the default-tenant path uses the global singleton unchanged (D-34).

Bounded concurrency on the FS adapter

spawn_blocking calls on the FileSystemAdapter are bounded via tokio::sync::Semaphore. Pre-fix, a fanout of concurrent stores could exhaust the tokio blocking pool and deadlock unrelated tasks (D-35).

Conformance suite

The blob adapter conformance suite extends to cover idempotency (re-store same hash), hash-mismatch rejection, range-past-end behavior, cross-blob isolation (writes to blob A can't leak into blob B's namespace), and random-ghost reads (resolve a never-published BlobRef). Adapter authors pin against the same suite the in-tree FileSystemAdapter does (D-36).

Cross-binding adapter authoring

Adapters can be written in the host language across every binding:

Python — PyBlobAdapter with sync + async def method support. Async adapters run on a binding-owned event loop on a dedicated thread (one loop per process); calling thread sharing is via asyncio.run_coroutine_threadsafe. An aiobotocore / httpx.AsyncClient / SQLAlchemy async engine inside the adapter is safe — the binding never spins up a fresh asyncio.run per call (D-4).
Node — NodeBlobAdapter (sync TSFN bridge) + NodeAsyncBlobAdapter (Promise-returning TSFN bridge).
C / cgo — NetBlobAdapterVtable with per-field null-check at registration; partial vtables return NET_ERR_BLOB_VTABLE_INVALID rather than crashing on first dispatch (D-22).

BlobError::NotFound(uri) sanitizes the URI before including it in the error string — control chars escape as \xNN, length caps at 256 bytes — so a binding logging the error can't be log-injected by an attacker who controls the URI (D-31).

Mesh-native blob storage (Phase 3.5)

Phase 3's BlobRef + BlobAdapter hook treats the substrate as a carrier for content-addressed pointers — the bytes live in S3 / Ceph / IPFS / the local FS. Phase 3.5 extends that hook with a substrate-owned content-addressed store: MeshBlobAdapter implements BlobAdapter against the local mesh's RedEX replication layer, registered under the mesh:// URI scheme. A Dataforts-enabled cluster has a working blob store the moment Redex::enable_replication(mesh) is called; operators pick a replication_factor instead of standing up a separate storage system.

The full plan + design rationale lives in DATAFORTS_BLOB_STORAGE_PLAN.md. Shipped as PR-5a through PR-5r + a post-feature hardening bundle.

`MeshBlobAdapter`

let adapter = MeshBlobAdapter::new("mesh-prod", redex.clone())
    .with_persistent(true)
    .with_replication(ReplicationConfig::factor(3))
    .with_retention_floor(Duration::from_secs(24 * 3600))
    .with_disk_capacity(1 << 40)
    .with_auth_guard(auth_guard.clone())
    .with_blob_heat(blob_heat_registry, Duration::from_secs(60));

Implements BlobAdapter::{store, fetch, fetch_range, exists, delete, stat, prefetch} plus store_stream / fetch_stream for multi-GB payloads. store BLAKE3-verifies the supplied bytes against blob_ref.hash before persisting; idempotent — repeated stores of identical bytes against the same hash are a no-op. Chunks above the 4 MiB threshold split into independently-content-addressed RedexFiles, with a small manifest blob (one BlobRef::Manifest) carrying the chunk list.

`BlobRef::Manifest` + chunking

BlobRef gains a Manifest { encoding, chunks: Vec<ChunkRef>, size } variant alongside the v0.15 Small. Wire form is forward-compatible — the 4-byte magic + version byte gate variants. Encoding::Replicated ships in v0.2; Encoding::ReedSolomon { k, m } is reserved on the wire for v0.3. Chunking is fixed-size 4 MiB; a 16 GiB blob holds 4096 chunk references (≈144 KiB manifest, within the inline path itself).

`publish_with_blob` — store-then-publish

let receipt = mesh.publish_with_blob(
    channel,
    payload_bytes,
    BlobDurability::ReplicatedTo(3),
).await?;

Stores the bytes to the configured durability, then publishes an event referencing the resulting BlobRef. The receipt carries a WriteToken whose applied_through_seq watermark composes with Phase 5's read-your-writes — a consumer calling tasks.wait_for_token(token, deadline) blocks until both the publish event has folded and the chunks have replicated to the requested durability. BlobDurability::{BestEffort, DurableOnLocal, ReplicatedTo(n)} chooses the trade-off between latency and the durability guarantee the receipt asserts.

Refcount + GC + pinning

BlobRefcountTable tracks per-hash references from three sources: RedEX chain folds (PR-5h wires greedy into the increment / decrement path on cache admit / eviction), CortEX adapters indexing events, and direct pin(blob_ref) / unpin(blob_ref) operator calls. sweep_gc(now, disk_pressure) collects refcount = 0 + unpinned hashes whose first_seen is older than the retention floor (default 24 h); disk_pressure = true bypasses the floor for emergency reclaim. delete_chunk drops the refcount entry inline rather than waiting for the sweep.

A health gate advertises dataforts:blob-storage-unhealthy when local disk crosses 95 % and clears at 85 % (hysteresis); other nodes' admission filters reject inbound migrations to an unhealthy node.

Capability extension

Three new capability families compose against the existing 5-axis PlacementFilter:

BlobCapability — storage, disk_total_gb, disk_free_gb, class.
GreedyCapability — enabled, scope, proximity. Same shape as the chain-side greedy gate; blobs reuse the chain proximity score.
GravityCapability — enabled, scope, proximity. Independent of greedy; a node can participate in gravity migration without speculatively greedy-pulling.

PlacementFilter gains an Artifact::Blob { blob_hash, size_bytes, encoding, capabilities } variant; the score function reads blob.disk_free_gb + blob.storage + gravity.scope to gate blob placement.

TopologyScope (Node ⊂ Zone ⊂ Region ⊂ Mesh) is a hard boundary on greedy / gravity decisions — scope == Zone means the local node never pulls or accepts migration of a blob whose publisher is in a different zone.

G-1 / G-2 / G-3 — admission, gravity, migration

Three pure-logic decision primitives plus the runtime that consumes them:

should_pull_blob(local_caps, publisher_caps) (G-1). Greedy admission verdict: Admit / Reject(reason) where reason ∈ { NoStorageCap, GreedyDisabled, ProximityZero, Unhealthy, ScopeMismatch }. Wired into GreedyRuntime::dispatch_event so admitted chains carrying BlobRefs trigger a BlobAdapter::prefetch on the referenced blob. Counters: dataforts_greedy_blob_pulls_admitted_total / …_rejected_total{reason}.
should_migrate_blob_to(target_caps, publisher_caps, size_bytes) (G-2 / G-3). Gravity migration verdict for target_caps; extends the should_pull_blob shape with a disk_free_gb headroom check (rounded up — 1.5 GiB blob → ceil(1.5) = 2 GiB required). MigrateBlobReject::InsufficientDisk is the additional variant.
drive_blob_migration_tick(local_caps, capability_index, adapter, size_resolver) + the _with_manifest_resolver variant. Walks peers in the capability index, parses heat:blob:<hex>=<rate> reserved tags via parse_blob_heat_tag, runs should_migrate_blob_to against each candidate, and on admit calls adapter.prefetch. The manifest-resolver variant recursively prefetches every constituent chunk of a BlobRef::Manifest (PR-5o). Returns a BlobMigrationTickReport with per-reason counters for operator dashboards.

Per-node pull, not centralized push — each node decides what to pull from its local capability view. The plan documents the storage-overflow push-to-peer track as deferred future work.

Blob heat — `heat:blob:<hex>=<rate>` tags

Mirrors the chain-side gravity layer with a key-shape change: blob heat keys on the 32-byte chunk hash. BlobHeatRegistry (LRU + cap + half-life decay, same discipline as HeatRegistry); MeshBlobAdapter::with_blob_heat(registry, half_life) opts the adapter into bumping heat on every successful fetch / fetch_range. MeshBlobAdapter::tick_blob_heat(policy, sink) walks the registry and routes Emit { rate } / Withdraw decisions through the BlobHeatSink trait; MeshNode implements the sink by adding a heat:blob:<hex64>=<rate> reserved tag to the local capability set and rebroadcasting via announce_capabilities.

The blob: body sub-prefix keeps blob-heat tags disjoint from chain-heat tags on the wire (heat:<origin_hex>=<rate> for chains, heat:blob:<hash_hex>=<rate> for blobs).

G-6 — Auth

pin_authorized / unpin_authorized / delete_chunk_authorized gate on AuthGuard::is_authorized_full(origin, channel) against the chain that originally published the blob. The unauth pin / unpin / delete_chunk variants remain available for system-internal callers (GC sweep, chain-fold refcount increment / decrement). BlobError::Unauthorized is the typed rejection.

`net-blob` operator CLI

Operator surface shipped behind the new cli Cargo feature (features = ["dataforts", "redex-disk", "cli"]). Subcommands:

net-blob put <path> — store + return the resulting BlobRef.
net-blob get <hash> --out <path> — fetch; refuses to clobber existing output files.
net-blob exists <hash> — exit 0 if present, exit 1 if absent.
net-blob stat <hash> — refcount + size + last-seen.
net-blob ls — list known content hashes.
net-blob pin <hash> / net-blob unpin <hash> — operator pin / unpin.
net-blob gc [--retention <duration>] [--dry-run] [--disk-pressure] — GC sweep. --dry-run lists candidates; --disk-pressure bypasses the retention floor.
net-blob metrics — Prometheus text body.

--format json is available across every subcommand for scripting; parse_duration accepts 30s / 5m / 1h / 24h / 7d.

Cross-binding — Python

net.MeshBlobAdapter lands in the Python binding behind --features dataforts. Methods: store(blob_ref, data), fetch(blob_ref) -> bytes, fetch_range(blob_ref, start, end) -> bytes (half-open [start, end)), exists(blob_ref) -> bool, prometheus_text() -> str. Plus a PyBlobRef constructor taking (uri, hash_bytes, size) and round-tripping through encode() / BlobRef.from_encoded(bytes). Persistent mode (MeshBlobAdapter(redex, "id", persistent=True)) writes per-chunk RedexFiles to disk.

Node + Go binding wrappers for the v0.2 MeshBlobAdapter surface are tracked as deferred per-binding follow-ups in the plan doc.

Hardening — post-PR-5j review pass

Eighteen commits between PR-5r and the v0.15 cut closed second-pass review items. Grouped by area:

DoS surfaces

MeshNode::filter_unauthorized_heat_tags caps incoming heat:blob: tags at 256 per announcement; the cap bounds migration-controller amplification (each surviving heat tag drives a prefetch attempt).
CapabilityIndex::by_origin_hash is a u32-truncated shortcut; an AtomicU64 collision_count field surfaces last-writer-wins collisions on the admission hot path for operator observability (a wire-format-preserving fix; full collision-safe indexing is out of scope for v0.15).
BlobMigrationController caps per-peer prefetch admits per tick so a single peer can't dominate the disk-bandwidth budget.
Per-channel chain_blob_refs shadow set in the greedy runtime is bounded; a misbehaving publisher can't inflate per-channel memory unboundedly.

Soundness

Python &[u8] adapter parameters (PyMeshBlobAdapter::store, blob_publish, blob_resolve) now copy bytes under the GIL (data.to_vec()) before py.detach(). PyO3 0.28's strict &[u8] type-rejects bytearray at the FFI boundary; the post-fix copy keeps the capture-then-detach pattern safe against a hypothetical future PyO3 relaxation.
CapabilityIndex fails closed when a wire u32 origin_hash is ambiguous and falls back to the empty-caps default for vacant slots.
MeshBlobAdapter serializes concurrent stores against the same hash through a per-hash lock and BLAKE3-verifies bytes already on disk match the content address before short-circuiting the idempotent re-store path.

Races

gravity_tick captures sink + emissions + policy under one read of the gravity RwLock. Pre-fix it took the lock twice; a concurrent set_gravity / clear_gravity between reads could renormalize emissions computed under policy A against policy B.
drive_blob_migration_tick_with_manifest_resolver only inserts hashes into the dedup set after a successful Admit + Ok prefetch; rejected siblings + prefetch errors stay reconsiderable when the same hash surfaces under a later candidate's manifest expansion.
BlobMigrationController floors the publisher-scope check at the narrowest claim across all heat advertisers for the same hash so a single broad-scope peer can't bypass a narrower-scope peer's gate.

Label injection

Operator-supplied adapter_id is escaped per the Prometheus text-exposition spec (\\, \", \n) before being interpolated into label values. A --adapter-id 'evil"\n# bogus_metric{} 1\n#' payload can't inject fake metric lines.

Operator-surface hardening

net-blob get --out refuses to clobber existing output files (the CLI may run with elevated privileges).
delete_chunk drops the refcount entry inline rather than waiting for sweep_gc.
BlobError::Unauthorized typed variant separates auth-rejection from other rejection modes.

Build graph

dataforts = ["redex", "redex-disk", "dep:blake3"]. --features dataforts alone previously failed to compile because the blob path calls RedexFile::sync() which is gated behind redex-disk. The feature graph now encodes the actual dep.

Doc + test-name polish

Two pull_rejects_* admission tests asserted Admit (Zone-narrower-than-Mesh + absent-publisher-scope-defaults-to-Mesh) — renamed to pull_admits_*.
controller_skips_peers_without_blob_heat_tags renamed to controller_ignores_chain_heat_shape_tags.
BlobRef::encoded_len doc now documents Small as O(1) and Manifest as full-encode-cost (was "cheap for both variants").
PyMeshBlobAdapter::fetch_range doc spells out half-open [start, end) tied to Python slice semantics.
publish_with_blob doc drops the overstated atomicity claim and documents chunk-advertise ordering inline.

The full per-commit log lives in the plan doc's Shipping status table under "Hardening — post-PR-5j hardening pass."

Active blob overflow (Phase 3.5 / v0.3 blob track)

v0.2 mesh-native blob storage is intentionally pull-only — when a node fills up, it advertises dataforts:blob-storage-unhealthy and other nodes' admission rejects inbound migrations. The local node never pushes its own blobs elsewhere; under sustained saturation a node either reclaims via GC or stops accepting new bytes. The v0.3 active-overflow extension closes the loop: when a node fills up, it picks coldest blobs by inverse blob-heat and pushes them to peers that have free disk and have opted into receiving overflow.

The plan + design rationale lives in DATAFORTS_BLOB_OVERFLOW_PLAN.md. Shipped as P1..P5 across five commits on the dataforts-overflow branch.

Disabled by default, one boolean to turn on

Active overflow is off in v0.2 deployments — every existing call site keeps the v0.2 pull-only posture without code changes. To opt in, operators flip a single boolean on the adapter:

// Construction-time, simple form:
let adapter = MeshBlobAdapter::new("mesh-prod", redex.clone())
    .with_overflow(OverflowConfig { enabled: true, ..Default::default() });

// Or with typed tunables:
let adapter = MeshBlobAdapter::new("mesh-prod", redex.clone())
    .with_overflow(OverflowConfig {
        enabled: true,
        high_water_ratio: 0.80,
        low_water_ratio: 0.65,
        max_pushes_per_tick: 8,
        scope: TopologyScope::Zone,
        tick_interval_ms: 30_000,
    });

// Runtime toggle — no rebuild:
adapter.set_overflow_enabled(true);
adapter.set_overflow_enabled(false);

When enabled, the adapter advertises dataforts.blob.overflow on its capability set; peer-selection on the push side filters by this tag so overflow targets only nodes that have themselves opted in. Symmetric opt-in: the receive-side admission gate rejects pushes from a sender that isn't overflow-enabled.

`OverflowConfig` thresholds

pub struct OverflowConfig {
    pub enabled: bool,                  // master switch
    pub high_water_ratio: f64,          // 0.85 default — triggers tick
    pub low_water_ratio: f64,           // 0.70 default — clears tick (hysteresis)
    pub max_pushes_per_tick: usize,     // 16 default — bandwidth burst cap
    pub scope: TopologyScope,           // Mesh default — push-target scope bound
    pub tick_interval_ms: u64,          // 30_000 default
}

Hysteresis mirrors the existing dataforts:blob-storage-unhealthy health-gate (95% / 85%) with looser thresholds because overflow fires before the unhealthy advertisement — by the time a node is unhealthy, overflow has already been shedding for a while.

G-7 — Active overflow admission

pub fn should_accept_overflow_from(
    local_caps: &CapabilitySet,
    sender_caps: &CapabilitySet,
    blob_size_bytes: u64,
) -> OverflowVerdict;

Receive-side mirror of should_migrate_blob_to. Six ordered gates: NoStorageCap → NotParticipating → SenderNotOverflowing → Unhealthy → ScopeMismatch → InsufficientDisk. Each OverflowReject variant maps to a distinct Prometheus counter label so operators dashboard both sides.

The ordering matters operationally: a compute-only node surfaces NoStorageCap rather than NotParticipating, even when both gates would reject — the most actionable signal wins.

`BlobOverflowController` + tick driver

pub struct BlobOverflowController<'a> {
    pub local_caps: &'a CapabilitySet,
    pub capability_index: &'a CapabilityIndex,
    pub heat_registry: &'a Arc<Mutex<BlobHeatRegistry>>,
    pub refcount: &'a BlobRefcountTable,
    pub config: &'a OverflowConfig,
}

The controller's candidates(now, size_for_hash) walks the heat registry in ascending-rate order (coldest first), filters out pinned + non-zero-refcount hashes, and for each remaining candidate selects an overflow-enabled peer with sufficient disk-free + matching scope. Target ranking: highest disk_free_gb wins (greedy spread across peers); ties broken by lowest node_id for determinism.

drive_blob_overflow_tick composes the controller + hysteresis state machine + the OverflowPushSink trait:

pub async fn drive_blob_overflow_tick(
    controller: &BlobOverflowController<'_>,
    sink: &dyn OverflowPushSink,
    observation: OverflowTickObservation<'_>,
    size_for_hash: impl Fn([u8; 32]) -> Option<u64>,
) -> BlobOverflowTickReport;

OverflowTickObservation bundles per-tick state (disk stats, hysteresis atomic, clock). The BlobOverflowTickReport carries every counter the Prometheus emitter needs.

MeshBlobAdapter::drive_overflow_tick(ctx, size_for_hash) is the 2-arg convenience wrapper — composes the controller, threads the adapter's refcount / config / overflow_active, runs the tick, auto-records the report into the adapter's metrics.

Wire protocol — `OverflowPush` RPC

pub struct OverflowPush {
    pub blob_hash: [u8; 32],
    pub size_bytes: u64,
    pub sender_node_id: u64,
}

pub enum OverflowPushAck {
    Accepted,
    Rejected(OverflowReject),
    OpenChunkFailed,
}

The chunk bytes themselves don't ride this RPC — the nudge tells the receiver to open the chunk channel against its local Redex with replication armed; the existing per-chunk replication runtime pulls the bytes from any holder advertising causal:<hash> (typically the sender). The RPC routes through the existing nRPC machinery under the dataforts.blob.overflow_push service name.

Sender side: MeshNode::send_overflow_push(target, hash, size) -> Result<OverflowPushAck, BlobError> — encodes the request, dispatches via MeshNode::call, decodes the typed ack.
Receiver side: MeshNode::serve_overflow_push(adapter) -> ServeHandle registers the OverflowPushHandler under the service name. Each inbound request reads live user_caps_snapshot + the capability index, runs admission, on Admit calls adapter.prefetch(BlobRef::small(...)) to open the chunk channel.
MeshNodeOverflowPushSink — concrete OverflowPushSink impl wrapping Arc<MeshNode>. Maps non-Accepted acks to typed BlobError::Backend so the controller's push_errors counter bumps uniformly.

OverflowReject carries serde::{Serialize, Deserialize} so the typed reason rides inside OverflowPushAck::Rejected across the wire intact.

Prometheus counter family

The adapter's prometheus_text() body emits the full overflow surface:

dataforts_blob_overflow_pushes_admitted_total{adapter="..."}     <counter>
dataforts_blob_overflow_push_errors_total{adapter="..."}         <counter>
dataforts_blob_overflow_pushed_bytes_total{adapter="..."}        <counter>
dataforts_blob_overflow_rejected_no_target_total{adapter="..."}  <counter>
dataforts_blob_overflow_rejected_total{adapter="...",reason="no_storage_cap"}        <counter>
dataforts_blob_overflow_rejected_total{adapter="...",reason="not_participating"}     <counter>
dataforts_blob_overflow_rejected_total{adapter="...",reason="sender_not_overflowing"} <counter>
dataforts_blob_overflow_rejected_total{adapter="...",reason="unhealthy"}             <counter>
dataforts_blob_overflow_rejected_total{adapter="...",reason="scope_mismatch"}        <counter>
dataforts_blob_overflow_rejected_total{adapter="...",reason="insufficient_disk"}     <counter>
dataforts_blob_overflow_high_water_triggered_total{adapter="..."} <counter>   # false→true edges
dataforts_blob_overflow_low_water_cleared_total{adapter="..."}    <counter>   # true→false edges
dataforts_blob_overflow_active{adapter="..."}                     <gauge 0/1>
dataforts_blob_overflow_disk_ratio{adapter="..."}                 <gauge 0..1>

Sender's push_errors_total bumps on every non-Accepted ack (RPC transport + admission rejection + chunk open failure). The receiver's rejected_total{reason} family bumps on each admission rejection by variant — operators dashboarding both sides see matching volumes.

Hysteresis transitions only bump on the edge: false → true increments high_water_triggered_total, true → false increments low_water_cleared_total. Repeated active-during ticks don't bump either counter, so the metrics count distinct "overflow episodes" rather than steady-state ticks.

`net-blob overflow status` CLI

net-blob overflow status
net-blob --format json overflow status

Prints the configured boolean, the runtime overflow_active flag (set by the most recent tick on this process), the configured thresholds, and the cumulative counter family. JSON form is shape-stable: top-level keys adapter / config / active / counters, with every per-reason counter present even at zero (operator dashboards don't want missing keys).

Cross-binding surface

MeshBlobAdapter + the overflow surface ship across all four bindings (Rust, Python, Node/TypeScript, Go, C). Every binding takes a MeshBlobAdapter (or MeshBlobAdapterHandle* for C) at construction, exposes the v0.2 CRUD path (store / fetch / exists / prometheus_text), and surfaces the v0.3 overflow control as a paired getter/setter on enabled + active + config. Every binding uses the same OverflowConfig shape — enabled / high_water_ratio / low_water_ratio / max_pushes_per_tick / scope / tick_interval_ms — and accepts a bool form (the simple master-switch case) where the host language allows.

Rust — MeshBlobAdapter::with_overflow(OverflowConfig { .. }) builder, set_overflow_enabled(bool) / set_overflow_config(OverflowConfig) runtime setters, overflow_enabled() / overflow_active() / overflow_config() getters.

Python — MeshBlobAdapter(redex, "id", overflow=...) kwarg accepting bool or dict; set_overflow_enabled / set_overflow_config methods; overflow_enabled / overflow_active / overflow_config properties. Dict path enforces typed errors: unknown keys raise TypeError (typo defense — high_water_ration doesn't silently fail); invalid scope strings raise ValueError.

from net import MeshBlobAdapter, Redex

redex = Redex(persistent_dir="/data/blobs")
adapter = MeshBlobAdapter(
    redex,
    "py-prod",
    overflow={"high_water_ratio": 0.90, "max_pushes_per_tick": 4, "scope": "zone"},
)
adapter.set_overflow_enabled(True)
print(adapter.overflow_active, adapter.overflow_config)

Node / TypeScript — new MeshBlobAdapter(redex, "id", { persistent?, overflow? }); overflow accepts a typed OverflowConfigJs object. setOverflowEnabled / setOverflowConfig runtime methods; overflowEnabled / overflowActive / overflowConfig getters.

import { MeshBlobAdapter, Redex } from '@ai2070/net';

const redex = new Redex({ persistentDir: '/data/blobs' });
const adapter = new MeshBlobAdapter(redex, 'node-prod', {
  persistent: true,
  overflow: {
    enabled: true,
    highWaterRatio: 0.80,
    lowWaterRatio: 0.65,
    maxPushesPerTick: 8,
    scope: 'zone',
    tickIntervalMs: 30_000,
  },
});
adapter.setOverflowEnabled(false);
console.log(adapter.overflowEnabled, adapter.overflowActive, adapter.overflowConfig);

Go — NewMeshBlobAdapter(redex, "id", *MeshBlobAdapterOpts) constructor; Opts.Overflow *OverflowConfig is the typed config. SetOverflowEnabled(bool) / SetOverflowConfig(*OverflowConfig) methods; OverflowEnabled() / OverflowActive() / OverflowConfig() getters return (value, error) per Go convention. Typed sentinels: ErrBlob / ErrBlobClosed / ErrBlobInvalidConfig.

adapter, _ := net.NewMeshBlobAdapter(redex, "go-prod", &net.MeshBlobAdapterOpts{
    Persistent: true,
    Overflow: &net.OverflowConfig{
        Enabled:          true,
        HighWaterRatio:   0.80,
        MaxPushesPerTick: 8,
        Scope:            "zone",
    },
})
defer adapter.Close()
adapter.SetOverflowEnabled(true)

C FFI — opaque MeshBlobAdapterHandle* from net_mesh_blob_adapter_new(redex, "id", persistent, overflow_json); the overflow config arrives as a JSON string at the boundary so the C consumer doesn't have to mirror the typed struct. Eleven new functions: _new / _free / _store / _fetch / _exists / _prometheus_text plus the v0.3 control family (_overflow_enabled / _overflow_active / _overflow_config returning JSON / _set_overflow_enabled / _set_overflow_config).

MeshBlobAdapterHandle* adapter = net_mesh_blob_adapter_new(
    redex,
    "c-prod",
    /* persistent */ 1,
    "{\"enabled\":true,\"high_water_ratio\":0.80,\"scope\":\"zone\"}"
);
net_mesh_blob_adapter_set_overflow_enabled(adapter, 0);
char* cfg_json = net_mesh_blob_adapter_overflow_config(adapter);
// ...consume cfg_json...
net_free_string(cfg_json);
net_mesh_blob_adapter_free(adapter);

The C surface requires building the cdylib with dataforts,netdb,redex-disk; the Go binding wraps these via cgo and the SDK READMEs document the per-binding shape (Rust / Python / TypeScript / Go / C).

Storage layout + safe-delete

Sender doesn't immediately delete the local copy on OverflowPushAck::Accepted — the durability watermark observation (sender polls capability index for receiver's causal:<hash> advertisement) is deferred to a future P6 follow-up. Today the local copy stays until the standard GC sweep collects it under retention + refcount-zero.

This is conservative-by-default: the receiver may have admitted but the chunk-pull could still fail before the bytes land. Operators running into "sender disk doesn't drain fast enough" today can flip gc --disk-pressure (which bypasses the retention floor for refcount-zero hashes) — the explicit watermark gate lands in v0.16+.

Hardening — clippy + arg-bundling

The OverflowTickContext<'a> + OverflowTickObservation<'a> borrow structs bundle the tick-driver args so neither drive_blob_overflow_tick (4 args) nor MeshBlobAdapter::drive_overflow_tick (2 args) trips clippy's too_many_arguments lint. No #[allow(clippy::too_many_arguments)] anywhere in the overflow surface — the bundling earns the clean signatures.

Test coverage

P1: 17 pure-logic tests (should_accept_overflow_from × 8 reject variants + admit path + ordering, BlobCapability::overflow_enabled round-trip × 2, OverflowConfig adapter surface × 5).
P2: 20 controller / tick / hysteresis tests (step_overflow_hysteresis × 4 edge cases, BlobOverflowController::candidates × 7 filter paths, tick-driver tests × 6 against an OverflowPushRecorder mock, scope_covers × 2, MeshBlobAdapter::overflow_active shared-state × 1).
P3: 7 wire-format + integration tests (postcard round-trip × 5 variants + 2-node MeshNode::send/serve_overflow_push end-to-end × 2).
P4: 10 metrics + CLI tests (record_overflow_tick bumps × 4 paths, per-reason record_overflow_reject × 1, Prometheus body shape × 2, CLI overflow status Human + JSON + metrics-body inclusion × 3).
P5: 12 Python pytest tests (default-off + bool-true + bool-false + dict-overrides + dict-prestage + scope-parsing + unknown-key + bad-scope + bad-type + runtime-setter + whole-config-setter + round-trip × 12).

Total: 66 new tests across the v0.3 overflow track.

Read-your-writes (Phase 5)

Every successful Tasks::create / Memories::insert / etc. returns a WriteToken { origin_hash, seq }. Pass it to wait_for_token(token, deadline) and the call blocks until the local fold has actually applied that sequence number — not just folded it. A producer reads its own write through the cache deterministically; no busy-poll, no time-window heuristic.

`WriteToken`

pub struct WriteToken {
    pub(crate) version: u8,
    pub(crate) origin_hash: u64,
    pub(crate) seq: u64,
}

Fields are pub(crate); the public constructor is #[doc(hidden)]. FromStr is gated behind #[cfg(test)] or the wire-debug feature. Tokens are unforgeable only against the adapter that issued them (via origin binding); the threat model is documented inline (D-19).

`wait_for_token` — applied vs. folded

Pre-fix, wait_for_token delegated to wait_for_seq, which returned when the folded watermark passed seq — including events that FoldErrorPolicy silently skipped via RedexError::is_recoverable_decode. A producer whose write hit a skip got Ok(()) and then read state that didn't reflect its write.

v0.15 adds applied_through_seq() (events that actually ran through the fold) alongside the existing folded_through_seq() (events the fold saw). wait_for_token waits on applied, not folded; skipped events are no longer auto-acknowledged (D-17).

`FoldStopped` error variant

wait_for_seq previously returned Ok when running == false (the fold task crashed under FoldErrorPolicy::Stop). Every pending RYW wait resolved with a silent Ok(()) even though seq was never folded. v0.15 adds WaitForTokenError::FoldStopped { applied_through_seq }; the wait path checks applied_through_seq >= seq when it wakes due to running == false and surfaces the typed error when the fold actually stalled (D-18).

Non-blocking poll — `deadline_ms == 0`

wait_for_token(token, 0) now does a synchronous applied-vs-token check and returns Ok(()) / Err(Timeout) / Err(FoldStopped) without scheduling a wait. Pre-fix the FFI rewrote 0 to 1 ms, costing a real wait round-trip for a "is fold caught up?" probe (D-23). The synchronous-poll behavior is consistent across the FFI / Node / Go / Python surfaces; the Python surface promoted poll_for_token to the public API alongside wait_for_token so non-async Python callers can probe without spawning a task (N-4).

Process-wide in-flight cap

The 1024-deep wait-queue cap was per-adapter pre-fix; a process with 100 channels could stack 100 K outstanding RYW waiters. v0.15 ships set_global_ryw_inflight_cap(usize) for a process-wide bound; every wait_for_token call does a two-tier acquire (process-wide first, then per-adapter). The semaphore is renamed ryw_inflight_cap with a non-FIFO documentation note (the current implementation is Semaphore::try_acquire; true FIFO is deferred) (D-37, D-38).

Cross-binding API surface

Binding	Surface
Rust	`tasks.wait_for_token(token, Duration)` / `memories.wait_for_token(token, Duration)`; `tasks.poll_for_token(token)` synchronous variant
Python	`tasks.wait_for_token(token, deadline_ms=…)`; `deadline_ms=0` is a non-blocking poll (N-4)
Node	`tasks.waitForToken(token, deadlineMs)`; `deadlineMs === 0` is a non-blocking poll
Go	`tasks.WaitForToken(token, timeout)` + `tasks.PollForToken(token)` + `tasks.WaitForTokenContext(ctx, token)` non-blocking variant; Go context cancellation isn't propagated into the FFI wait — see `WaitForTokenContext` rustdoc for the contract (D-45, N-11)
C	`net_tasks_wait_for_token` / `net_memories_wait_for_token`; `timeout_ms == 0` is a non-blocking poll. Every FFI entry wraps `block_on` in `std::panic::catch_unwind(AssertUnwindSafe(…))`; panics surface as `NET_ERR_PANIC` rather than unwinding across `extern "C"` (D-21)

Channel-hash widening — `u16` → `u32` canonical

The wire NetHeader::channel_hash (16 bits, 65 536 buckets) routinely collides at mesh scale — birthday-paradox threshold ~300 channels. Pre-fix every substrate decision keyed on the wire u16: ACL (AuthGuard), storage (Redex), config (ChannelConfigRegistry), token (PermissionToken), RYW. Two unrelated channels colliding on u16 shared one ACL decision, one RedexFile, one config row.

v0.15 widens the canonical channel hash to u32 substrate-wide while keeping the wire NetHeader::channel_hash at u16 — the per-packet width is fixed by the 64-byte cache-line-aligned header budget. The wire u16 is now a fast-path filter hint only; wire-side collisions are benign because every non-fast-path decision (auth / storage / config / RYW) keys on the canonical 32-bit hash via registry-side disambiguation.

Mirrors the origin_hash u64-canonical / u32-wire precedent set in v0.13: per-packet width fixed, application layer wider, narrowing helper at the wire boundary.

Canonical type

pub type ChannelHash = u32;

impl ChannelName {
    pub fn hash(&self) -> ChannelHash { … }        // canonical u32
    pub fn wire_hash(&self) -> u16 { … }            // wire fast-path hint
}
pub fn channel_hash(name: &str) -> ChannelHash { … }
pub fn wire_channel_hash(name: &str) -> u16 { … }

ChannelHash joint-collision threshold is ~65 K channels per process (above realistic deployment), so the canonical key is treated as collision-free in fast paths.

`ChannelConfigRegistry` — dual index

pub struct ChannelConfigRegistry {
    configs: DashMap<String, ChannelConfig>,
    by_hash: DashMap<ChannelHash, Vec<String>>,    // canonical (u32, rare collisions)
    by_wire_hash: DashMap<u16, Vec<String>>,       // wire (u16, routine collisions)
    prefix_configs: DashMap<String, ChannelConfig>,
}

get(canonical) returns None on the rare canonical collision (forces caller fallback); get_by_wire_hash(wire) returns None on wire-bucket collision (used by receive-side dispatch, contrast with ChannelRegistry::get_all_by_wire_hash below). Removals stay collision-safe — remove(canonical) keys on the unique canonical hash; remove_by_name(name) is the explicit-name path.

`ChannelRegistry` — return the full collision set

ChannelRegistry::get_by_wire_hash was renamed to get_all_by_wire_hash and explicitly returns the full collision-bucket vector. This contrasts with ChannelConfigRegistry::get_by_wire_hash, which returns None on collision to force a safe default at the policy layer. The naming asymmetry is intentional — operators querying "what channels share this wire bucket" want the full set; the policy layer querying "what's the config for this packet" wants a unique answer or nothing.

`AuthGuard` — canonical u32 ACL

The bloom-filter key buffer widens from 10 to 12 bytes (u64 origin_hash + u32 channel_hash); check_fast / authorize / revoke signatures all take ChannelHash. The two-tier authorization shape (fast-path bloom + verified cache + exact-name backstop) is unchanged; the canonical hash makes the fast-path bloom collision-resistant at realistic scale. The exact-name backstop remains the only collision-free path for control-plane / storage authorization decisions where adversarial canonical-hash collisions matter.

`PermissionToken` — 161-byte wire form

issuer:           32 bytes (EntityId)
subject:          32 bytes (EntityId)
scope:             4 bytes (u32)
channel_hash:      4 bytes (canonical ChannelHash, u32; was u16)
not_before:        8 bytes (u64 unix timestamp)
not_after:         8 bytes (u64 unix timestamp)
delegation_depth:  1 byte  (u8)
nonce:             8 bytes (u64)
--- signed ---
signature:        64 bytes (ed25519)

Total: 161 bytes (was 159). Signed payload: 97 bytes (was 95). PermissionToken::from_bytes rejects 159-byte input as TokenError::InvalidFormat; old tokens must be reissued under the wider form.

RPC inbound dispatcher — `(canonical, dispatcher)` pairs

MeshNode::register_rpc_inbound(channel_hash: ChannelHash, dispatcher) takes the canonical hash. The dispatcher map is indexed by the wire u16 for O(1) lookup on the inbound packet decode path; each bucket stores a Vec<(ChannelHash, RpcInboundDispatcher)> so wire-bucket collisions between independently-registered canonical channels don't share a dispatcher slot. RpcInboundEvent::channel_hash is the canonical u32 — dispatchers receive the disambiguated identity.

Five post-merge follow-up commits

A focused review pass landed five hardening commits on the channel-hash-32 branch after the primary widening:

#	Commit	Concern	Test added
1	`fda25a7d`	Race in `unregister_rpc_inbound` clobbering a concurrent sibling register	sibling-survives + race-stress
2	`af5f6c25`	Stale "16-bit verified cache" comment in `mesh.rs`	n/a (doc)
3	`1fb62fbc`	Stale 16-bit framing in two regression test docstrings	n/a (doc)
4	`c141e691`	Per-packet `Vec` allocation in the dispatch fast path	end-to-end wire-bucket collision fan-out
5	`c5e75ff6`	`get_by_wire_hash` semantics divergence between registries	full-collision-set contract test

The single-dispatcher hot path (the overwhelming case at typical sizing) avoids the heap allocation entirely; the collision-set vector is built only when a wire bucket has more than one canonical entry. The unregister race is closed by atomic remove-if-present semantics; concurrent register + unregister can no longer leave the map in a torn state.

Dataforts greedy stays on wire `u16`

The greedy data-plane cache deliberately keys on the wire u16 (not the canonical u32) because the wire hash is what the inbound packet that triggered the observe call carries — there's no canonical lookup at packet decode time. The cache file is named dataforts/greedy/<hex16>; two wire-colliding channels share a cache file (a small mix-up at the data-plane layer; ACL and storage decisions stay collision-safe via the canonical hash).

Hardening — `dataforts-feature` two-pass review

Two coordinated review passes landed before the v0.15 branch cut. The primary review on the dataforts-feature branch surfaced 54 numbered items (D-1..D-54): 4 blockers, 19 highs, 24 mediums, 7 lows. An independent second pass on 2026-05-12 surfaced 11 N-series items (N-1..N-11): 3 highs, 6 mediums, 2 lows. All but three closed before merge (deferred with rationale in the tracking doc). The closures group by area:

Greedy correctness (D-1..D-8 + D-25..D-28 + N-5)

Cluster-cap eviction withdraws chain announcements inline (D-1).
Bandwidth-budget rejection bumps a distinct counter rather than dropping events silently (D-2).
upsert on update subtracts the old bytes before replacing the file pointer (D-3).
chain_caps resolves the chain publisher's caps via the capability index, not the last-hop peer's (D-5).
TOCTOU on is_new_channel collapsed into a single locked get-or-insert (D-6).
tokio::spawn per inbound event bounded by a semaphore (D-7).
colocation_target_held resolved from the cache map, not hardcoded None (D-8).
gravity_tick coalesces N×announce_capabilities into one via announce_heat_batch (D-25).
Retention-trim drift on entry.bytes resyncs via RedexFile::retained_bytes (D-26).
5 cache-lock acquisitions per dispatch coalesced to 1 in the steady-state path; new-channel path takes 2 with TOCTOU re-check (D-28).
Eviction explicitly drops gravity.heat lock before calling sink.withdraw_chain to avoid lock-ordering hazards (N-5).

Gravity correctness (D-9..D-11 + D-29..D-30 + N-2 + N-9)

origin_hash == 0 no longer collapses per-chain heat (D-9, fix at publish-side + defense-in-depth at gravity-runtime entry).
HeatRegistry bounded + LRU-evicted + tick-pruned (D-10, N-2).
Inbound heat: tags gated on the publisher's matching causal: claim (D-11; per-peer rate-limit deferred per N-8).
should_emit_heat subnormal-safe via is_normal() + EPSILON-floor (D-29, N-9).
Log-scale wire normalization with configurable reference rate (D-30 / D-46).

Blob correctness (D-12..D-16 + D-31..D-36 + D-49..D-50 + D-52..D-53 + N-3 + N-6 + N-7)

FileSystemAdapter::store hash-verifies bytes (D-12).
URI-scheme keyed adapter dispatch closes authority confusion (D-13).
4-byte magic for BlobRef discriminator closes payload-misclassification (D-14).
BlobRef size bounded; fetch_range guards usize cast (D-15).
Streaming hooks on BlobAdapter (D-16).
Log injection via BlobError::NotFound(uri) sanitized (D-31).
Unique-suffix temp filenames (D-32); fsync of temp + parent dir (D-33).
Per-channel BlobAdapterRegistry override (D-34).
Bounded concurrency on spawn_blocking (D-35).
Conformance suite extended with idempotency / hash-mismatch / range-past-end / cross-blob isolation / random-ghost (D-36).
BlobError marked #[non_exhaustive] (D-49).
RedexFileConfig::blob_adapter_id unset surfaces the right error variant (D-50).
OpaqueCtx(AtomicPtr<c_void>) collapsed to plain *mut c_void (D-52).
Adapter timeout user-tunable (D-53).
path_for defends against symlinks in the shard root via canonicalize (N-3).
Windows rename-fallback TOCTOU on idempotent re-store hash-verifies existing content (N-6).
catch_unwind + caller-held locks documented as a hazard in ffi/mod.rs + per-binding READMEs (N-7).

RYW correctness (D-17..D-19 + D-37..D-38 + D-45 + D-51 + N-4 + N-11)

wait_for_token waits on applied seq, not folded (D-17).
FoldStopped error variant when fold task crashes mid-wait (D-18).
WriteToken doc-hidden constructor + threat-model docstring (D-19).
ryw_inflight_cap rename + non-FIFO doc note (D-37).
Process-wide set_global_ryw_inflight_cap with two-tier acquire (D-38).
Go binding lands Tasks + Memories adapters with WaitForToken + PollForToken + WaitForTokenContext (D-45).
wait_duration_nanos_sum saturating u128 → u64 cast (D-51).
Python wait_for_token(deadline_ms=0) non-blocking poll consistent with FFI / Node / Go (N-4).
Go context cancellation doc contract clarified (N-11).

FFI / cross-binding (D-20..D-23 + D-39..D-44 + D-54 + N-1 + N-10)

cgo externs link cleanly without dataforts feature via NET_ERR_FEATURE_NOT_BUILT stubs (D-20).
Panics across FFI caught + remapped to NET_ERR_PANIC (D-21).
Vtable per-field null-check (D-22).
timeout_ms == 0 honored as non-blocking poll (D-23).
mesh_arc drop coverage via RAII guard rather than duplicated drop-on-error (D-39).
Node await_tsfn_promise applies the 30 s timeout once (was 30 s × 2 → 60 s worst case) (D-40).
Node DataGravityConfigJs *_secs / _ms widths match the Rust + Python + Go peers (D-41).
Python Py<PyAny> adapters can no longer outlive interpreter finalization (D-42).
Python adapter data.to_vec() copies inside py.detach (D-43, N-1).
Go omitempty doc note on greedy / gravity numeric fields (D-44 deferred — substrate rejects 0 for every affected field; omitempty is correct).
Go runtime.SetFinalizer runs blocking Close on the GC thread — doc note rather than refactor (D-54).
Python atexit drain counts drained vs. missing entries via NET_PY_TRACE_ATEXIT env var (N-10).

Hygiene (D-47..D-48)

metrics.rs channel-cap race doc note (D-47).
_force_use_hashmap dead allow removed (D-48).

The deferred N-8 (per-peer rate-limiting of heat: tags) is acknowledged in D-11 and tracked for a separate slice; the auth-via-causal-claim gate forecloses the dominant attack vector today.

Test hygiene

Lib suite at 2645+ tests (was 2640+ at v0.14 release). 60+ net new tests across the four Rebel Yell phases + the channel-hash widening; every numbered review item ships with at least one regression where the shape made one possible. Notable additions: greedy admission + eviction unit coverage, gravity heat-counter decay + emission edge cases, blob conformance suite, RYW applied-vs-folded watermark separation, channel-hash canonical-vs-wire collision tests, RPC dispatcher race-stress + sibling-survives.
Cross-binding wire-format fixtures regenerate against the 161-byte token wire form. The 159-byte token vectors under tests/cross_lang_capability/ rename and re-encode; binding-side tests that hardcoded the 159-byte length update accordingly.
cargo clippy --all-features --all-targets -D warnings clean across substrate + every binding crate.
cargo doc --all-features --no-deps clean under RUSTDOCFLAGS="-D warnings" — rustdoc::broken_intra_doc_links and rustdoc::private_intra_doc_links both enforce.
Go go vet ./... clean under CGO_ENABLED=1; the pre-existing testOrigin uint32 / uint64 mismatch in cortex_test.go is fixed alongside the FFI net_channel_hash u16 → u32 change.

Breaking changes

Wire format — `PermissionToken` is 161 bytes

PermissionToken::WIRE_SIZE grows from 159 → 161 bytes; the signed payload grows from 95 → 97 bytes. PermissionToken::from_bytes rejects 159-byte input as TokenError::InvalidFormat. Old tokens must be reissued; mixed v0.14 / v0.15 fleets cannot exchange tokens. Recommend lockstep upgrade.

Wire format — `BlobRef` magic widens to 4 bytes

BlobRef::MAGIC = [0xB0, 0xB1, 0xB2, 0xB3]. Pre-v0.15 1-byte-discriminator blob refs (if any pilot deployment serialized them) are rejected on decode. Dataforts is new in v0.15, so this only matters for pre-release pilots.

API — `ChannelHash = u32` substrate-wide

ChannelName::hash() returns u32 (was u16). New ChannelName::wire_hash() -> u16 exposes the wire fast-path hint.
channel_hash(name: &str) -> u32 (was u16). New wire_channel_hash(name: &str) -> u16.
AuthGuard::{check_fast, authorize, revoke, is_authorized} take ChannelHash (was u16).
PermissionToken::channel_hash is u32 (was u16); TokenScope::with_channel, try_issue, TokenCache::{check, get} all widen.
MeshNode::register_rpc_inbound takes ChannelHash (was u16); RpcInboundEvent::channel_hash is u32.
ChannelConfigRegistry::{get, remove, priority} take ChannelHash; new get_by_wire_hash(u16) for receive-side disambiguation.
ChannelRegistry::get_by_wire_hash renamed to get_all_by_wire_hash and explicitly returns the full collision-bucket vector.

FFI — `net_channel_hash` takes `uint32_t*`

// v0.14
int net_channel_hash(const char* channel, uint16_t* out_hash);
// v0.15
int net_channel_hash(const char* channel, uint32_t* out_hash);

Go / Python / Node bindings widen their channel_hash / channelHash exports to uint32 / int (u32 range) / number (u32 range). TokenInfo.channel_hash fields widen to match.

API — Dataforts surface is new

Redex::enable_greedy_dataforts(mesh, GreedyConfig, local_caps, IntentRegistry), Redex::disable_greedy_dataforts(), Redex::enable_gravity_for_greedy(mesh, DataGravityPolicy), Redex::disable_gravity_for_greedy(), BlobAdapterRegistry, BlobRef, BlobAdapter trait, WriteToken, tasks.wait_for_token / memories.wait_for_token are all new in v0.15. Behind the dataforts Cargo feature; non-dataforts builds see typed RedexError stubs ("requires the dataforts feature; rebuild with --features dataforts") rather than a silent no-op.

Behavioral fixes that may surface as test breakage

Greedy dispatch_event is now lock-coalesced. Tests that asserted on the pre-fix 5-lock-per-dispatch behavior will see 1 lock in the steady state, 2 in the new-channel path.
HeatRegistry is capped at 8 K entries. Tests that fill the registry with > 8 K entries to observe unbounded growth will see LRU eviction.
should_emit_heat returns Skip on near-zero prev. Tests that injected prev = 1e-300 to observe the pre-fix inf-prone branch will see the bootstrap arm instead.
wait_for_token returns Err(WaitForTokenError::FoldStopped) when the fold task crashed mid-wait. Tests that asserted Ok(()) against a fold-stopped adapter will see the typed error.
wait_for_token(token, 0) is a non-blocking poll across every binding. Tests that injected 0 expecting a real 1 ms wait will see the synchronous return.
PermissionToken::from_bytes rejects 159-byte input. Tests that hardcoded the 159-byte wire form will see TokenError::InvalidFormat.

How to upgrade

Bump your Cargo.toml / package.json / requirements.txt / go.mod to the v0.15 line. Recompile / rebuild the binding cdylib (NAPI for Node, maturin for Python, cargo build -p net-compute-ffi + -p net-rpc-ffi for Go) with the dataforts Cargo feature on (pre-built release artifacts ship with the feature enabled).
Channel-hash type migration. Use ChannelHash (u32) for ACL / storage / config / RYW decisions; use ChannelName::wire_hash() / wire_channel_hash() for the 16-bit header value when constructing wire-level packets. The renames are compile errors — cargo build (and the binding-side TypeScript / Python static checks) drives the rewrite.
Token reissue. PermissionToken wire form is 161 bytes. Reissue tokens to clients; pre-v0.15 159-byte tokens are rejected on decode. The signed-payload field shifts mean old signatures don't verify against the new layout — there's no in-place upgrade.
Greedy opt-in. Channels that want greedy caching: call Redex::enable_greedy_dataforts(mesh, GreedyConfig, local_caps, IntentRegistry) once after constructing the Redex (idempotent). The runtime registers a GreedyObserver on the mesh's inbound dispatch; admission decisions run per inbound event without any per-channel opt-in. Redex::disable_greedy_dataforts() removes the observer.
Gravity opt-in. Layer gravity on top of greedy with Redex::enable_gravity_for_greedy(mesh, DataGravityPolicy). The tick loop spawns automatically; tune decay_half_life_secs, tick_interval_ms, emit_threshold_ratio, normalization_reference_rate to match the deployment's read-rate skew.
Blob adapter registration. For channels that publish payloads above the inline threshold: register an adapter (register_filesystem_blob_adapter(id, root) for the in-tree FS adapter; register_blob_adapter(id, instance) for a host-language adapter), then blob_publish(adapter_id, uri, bytes) / blob_resolve(blob_ref) against the registered URI scheme.
RYW opt-in. Capture the WriteToken returned from every tasks.create / memories.insert; pass it to tasks.wait_for_token(token, deadline) before reading state that needs to reflect the write. deadline_ms = 0 is a non-blocking poll.
Operator dashboards. Redex::greedy_prometheus_text() emits per-channel greedy metrics in Prometheus text format. Heat emissions ride the existing capability-announcement metrics — dataforts_gravity_emit_total, dataforts_gravity_heat_registry_size, etc.
Single-binding deployments without dataforts. Builds without the dataforts Cargo feature surface typed RedexError stubs from every enable_* entry point. The substrate substrate path is unchanged — RedEX, CortEX, NetDB, replication all work as in v0.14.
Cross-binding wire fixtures regenerated. If you have CI that asserts golden-vector parity against tests/cross_lang_capability/, the 161-byte token form means token-bearing fixtures change. The blob-ref fixtures land for the first time in v0.15.
FFI consumers (C / cgo). net_channel_hash takes uint32_t* (was uint16_t*). The four new Dataforts entry points (net_redex_enable_greedy_dataforts, net_redex_disable_greedy_dataforts, net_redex_enable_gravity_for_greedy, net_redex_disable_gravity_for_greedy) follow the existing net_redex_* shape. Without the dataforts feature, the symbols return NET_ERR_FEATURE_NOT_BUILT rather than failing to link.
Mixed v0.14 / v0.15 fleets. Replication traffic continues to work cross-version (the SUBPROTOCOL_REDEX wire format is unchanged). Tokens do not (161 vs 159 bytes). Recommend lockstep upgrade for any deployment using PermissionToken-bearing channels.

Net Docs

Sections